Pump Not Included

Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00

Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00
Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00
Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00
Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00
Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00
Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00

Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00    Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00

A fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. The FST fuel pump(s) directly feed the fuel rail(s). The volume of fuel inside the surge tank acts as a buffer to always keep the FST pump supplied with fuel. This volume is maintained by the main fuel tank's pump as well as the fuel returning from the fuel pressure regulator.

The surge tank also provides a quick and easy way to upgrade any standard fuel system without the need to modify the stock fuel tank or pump. This is an excellent fueling solution for vehicles installing large fuel demand power upgrades such as forced induction. All Fuel Surge Tanks Include. All pumps mount internally using gasoline, ethanol, and methanol resistant wiring.

For dual-pump configurations, each pump is wired independently. All hoses are submersible and E85 safe. The pump outlet fitting(s) are available in -6AN male size only (shown in green).

How to Select Your Fuel Surge Tank Configuration. Determine if your application will require one or two pumps. This is based on determining how much fuel flow the engine will need. NOTE: When pump(s) are included, the FST comes fully assembled and is ready to be installed in the vehicle.

When purchasing without pumps, use the included instructions. Next, select the fuel pump model that will be used from the options shown. Walbro GSS342 255LPH Pump This FST can be configured for single or dual pumps. For single pump FSTs, the fuel entering must be filtered.

Shown below is the dual pump variation. Walbro F90000262 Gas Pump This surge tank comes in a single pump version only. Please check out the Radium Multipump FST if more than 1 pump is required. Shown below is the internal structure of this surge tank (shown without the canister).

Walbro F90000274 E85 Pump This surge tank comes in a single pump version only. AEM 50-1000 Gas Pump This FST can be configured for single or dual pumps.

Shown below is the single pump variation. AEM 50-1200 E85 Pump This FST can be configured for single or dual pumps.

For a triple pump FST using these pumps, please go to the Radium Multipump FST Shown below is the dual pump variation. Bosch 0 580 254 044 Pump This surge tank comes in a single pump version only. Please check out the Radium Dual Bosch FSTsif more than one Bosch fuel pump is required. Ti Automotive E5LM Brushless Pump This FST can be configured for single or dual pumps.

NOTE: The Ti Automotive E5LM brushless pump motor requires a fuel controller to operate. Complete OMEGA Brushless System packages for this surge tank will be released soon by AMS Performance. Check availability first before ordering.

The single pump variation is shown above. Shown above is the dual pump variation. The fuel surge tank can be mounted anywhere in the vehicle.

However, mounting near collision prone areas, heat sources, or moving parts such as suspension components should be avoided. Note: All of the single pump FSTs listed above can be mounted anywhere from vertical to horizontal.

However, the dual pump FSTs cannot be mounted completely horizontal because the pickups are on opposing sides of one another internally. Choose a bracket below that best fits the application. Floor and Wall Moun t - This bracket is laser cut from aluminum and powder coated black and can be mounted on the side or bottom of the surge tank. Frame Mount - Because this bracket has a 90deg formed bend and is cantilevered, it is constructed from steel for superior strength. It is not only nickel plated to resist corrosion, it also allows for components to be grounded to the spare hole in the bracket.

This assumes the bracket is mounted to an electrically conductive material such as a steel frame. Angled Mount - This mounting bracket is used for vehicles that may have a limited mounting height. It can be mounted on a floor and against a wall. This bracket is made from laser cut aluminum and powder coated black. The item "Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00" is in sale since Thursday, June 9, 2016.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Tanks". The seller is "autocat51" and is located in Walnut, California. This item can be shipped worldwide.

  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: 20-0211-00
  • Brand: Radium
  • Non-Domestic Product: No


Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00    Radium Fuel Surge Tank Single Brushless Ti E5LM Pumps Not Included 20-0211-00